Parts / Service Specs
John Deere S-Series Combine Oil, Fuel & Hydraulic Capacities
For buyers planning pre-season maintenance on a John Deere S670, S680, S690, S770 or S780 combine. Every capacity figure below is taken directly from John Deere's own Quick Reference Guides, not estimated, and each model's filter part numbers link straight to that part's page for a quote.
Capacities are approximate, as published by John Deere. Confirm against your machine's operator's manual and serial-number break before ordering fluid or filters.
John Deere S670
John Deere QRG group: S660, S670
Fluid capacities
- Fuel tank
- 950 L (250 gal)
- Cooling system with heater (Cool-Gard II)
- 53 L (14 gal)
- Engine crankcase with filter (Plus-50 II)
- 27.5 L (7.3 gal)
- Hydraulic / hydrostatic reservoir (Hy-Gard)
- 31 L (8.2 gal)
Source: Filter Overview with Service Intervals and Capacities — ( -765000) S-Series Combines S550, S660, S670, S680, S690, John Deere, release date Apr 2021. Read 2026-09-03.
Filter part numbers
The curated filter set for this model, each linked to its own part page for pricing and a quote.
| PN | Description | Action |
|---|---|---|
| RE509672 | Engine oil filter (S660, S670) | |
| RE539465 | Primary fuel filter | |
| RE533910 | Secondary fuel filter | |
| HXE11090 | Engine primary air filter | |
| HXE11091 | Engine secondary air filter | |
| RE284091 | Cab fresh air filter | |
| L214634 | Cab recirculation air filter | |
| AH128449 | Hydraulic / main engine gear case filter | |
| AN207368 | Hydrostatic charge filter (open center w/ProDrive) | |
| RE542183 | Diesel particulate filter (DPF, S660/S670) |
Swipe to see full descriptions and actions.
Service intervals
Filter service intervals as published by John Deere for this model, by part number.
- RE509672
- Minimum hours before first engine oil change is 100 hours. Extended engine oil change every 500 hours or annually, whichever come first. The extended 500 hour interval is only allowed if using Plus-50 II oil with a John Deere filter and diesel fuel with sulfur content less than 15mg/kg (15ppm). If all conditions are not met, change oil and filter at 250 hours of operation.
- RE539465
- Replace fuel filters every 400 hours.
- RE533910
- Replace fuel filters every 400 hours.
- HXE11090
- Clean or Replace every 400 hours and as required.
- HXE11091
- Change Secondary filter only with Primary filter. Change or replace after 400 hours as required with Primary Air Filter.
- RE284091
- Clean or replace every 50 hours and as required.
- L214634
- Clean or replace every 200 hours and as required.
- AH128449
- Replace after first 100 hours, then every 400 hours.
- AN207368
- Replace every 400 hours.
- RE542183
- Check Every 4500 hours or Diagnostic Trouble Code (DTC) is generated.
Source: Filter Overview with Service Intervals and Capacities — ( -765000) S-Series Combines S550, S660, S670, S680, S690, John Deere, release date Apr 2021. Read 2026-09-03.
John Deere S680
John Deere QRG group: S680, S690
Fluid capacities
- Fuel tank
- 1,250 L (330 gal)
- Cooling system with heater (Cool-Gard II)
- 85 L (22.45 gal), IT461.2 L (16.16 gal), Tier 2
- Engine crankcase with filter (Plus-50 II)
- 43 L (11.4 gal), IT439 L (10.30 gal), Tier 2
- Hydraulic / hydrostatic reservoir (Hy-Gard)
- 47 L (12.4 gal)
Source: Filter Overview with Service Intervals and Capacities — ( -765000) S-Series Combines S550, S660, S670, S680, S690, John Deere, release date Apr 2021. Read 2026-09-03.
Filter part numbers
The curated filter set for this model, each linked to its own part page for pricing and a quote.
| PN | Description | Action |
|---|---|---|
| RE572785 | Engine oil filter (S680, S690) | |
| AXE12964 | Hydraulic reservoir filter (closed center) | |
| HXE11090 | Engine primary air filter |
Swipe to see full descriptions and actions.
Service intervals
Filter service intervals as published by John Deere for this model, by part number.
- RE572785
- Minimum hours before first engine oil change is 100 hours. Extended engine oil change every 500 hours or annually, whichever come first. The extended 500 hour interval is only allowed if using Plus-50 II oil with a John Deere filter and diesel fuel with sulfur content less than 15mg/kg (15ppm). If all conditions are not met, change oil and filter at 250 hours of operation.
- AXE12964
- Filter change interval for all three filters is 400 hours.
- HXE11090
- Clean or Replace every 400 hours and as required.
Source: Filter Overview with Service Intervals and Capacities — ( -765000) S-Series Combines S550, S660, S670, S680, S690, John Deere, release date Apr 2021. Read 2026-09-03.
John Deere S690
John Deere QRG group: S680, S690
Fluid capacities
- Fuel tank
- 1,250 L (330 gal)
- Cooling system with heater (Cool-Gard II)
- 85 L (22.45 gal), IT461.2 L (16.16 gal), Tier 2
- Engine crankcase with filter (Plus-50 II)
- 43 L (11.4 gal), IT439 L (10.30 gal), Tier 2
- Hydraulic / hydrostatic reservoir (Hy-Gard)
- 47 L (12.4 gal)
Source: Filter Overview with Service Intervals and Capacities — ( -765000) S-Series Combines S550, S660, S670, S680, S690, John Deere, release date Apr 2021. Read 2026-09-03.
Filter part numbers
The curated filter set for this model, each linked to its own part page for pricing and a quote.
| PN | Description | Action |
|---|---|---|
| RE572785 | Engine oil filter (S680, S690) | |
| AXE12964 | Hydraulic reservoir filter (closed center) | |
| AL203061 | Hydraulic reservoir filter (closed center, S.N. -745100) | |
| RE541813 | Diesel oxidation catalyst | |
| AH168783 | Cab air filter, heavy duty | |
| AH115833 | Cab air filter, standard | |
| H220870 | Cab recirculation air filter (S.N. -745100) | |
| HXE11090 | Engine primary air filter | |
| HXE11091 | Engine secondary air filter | |
| RE539465 | Primary fuel filter |
Swipe to see full descriptions and actions.
Service intervals
Filter service intervals as published by John Deere for this model, by part number.
- RE572785
- Minimum hours before first engine oil change is 100 hours. Extended engine oil change every 500 hours or annually, whichever come first. The extended 500 hour interval is only allowed if using Plus-50 II oil with a John Deere filter and diesel fuel with sulfur content less than 15mg/kg (15ppm). If all conditions are not met, change oil and filter at 250 hours of operation.
- AXE12964
- Filter change interval for all three filters is 400 hours.
- AL203061
- Filter change interval for all three filters is 400 hours.
- AH168783
- Clean or replace every 50 hours and as required.
- AH115833
- Clean or replace every 50 hours and as required.
- H220870
- Clean or replace every 200 hours and as required.
- HXE11090
- Clean or Replace every 400 hours and as required.
- HXE11091
- Change Secondary filter only with Primary filter. Change or replace after 400 hours as required with Primary Air Filter.
- RE539465
- Replace fuel filters every 400 hours.
Source: Filter Overview with Service Intervals and Capacities — ( -765000) S-Series Combines S550, S660, S670, S680, S690, John Deere, release date Apr 2021. Read 2026-09-03.
John Deere S770
John Deere QRG group: S760, S770
Fluid capacities
- Fuel tank
- 950 L (250 gal)
- Cooling system with heater (Cool-Gard II)
- 53 L (14 gal)
- Engine crankcase with filter (Plus-50 II)
- 27.5 L (7.3 gal), Tier 2/Stage II and FT4/Stage IV29 L (7.7 gal), Tier 3/Stage IIIA
- Hydraulic / hydrostatic reservoir (Hy-Gard)
- 31 L (8.2 gal)
Source: Filter Overview with Service Intervals and Capacities — S700 Series Combines S760, S770, S780, S790, John Deere, release date Apr 2021. Read 2026-09-03.
Filter part numbers
The curated filter set for this model, each linked to its own part page for pricing and a quote.
| PN | Description | Action |
|---|---|---|
| RE509672 | Engine oil filter (S660, S670) | |
| RE539465 | Primary fuel filter | |
| RE533910 | Secondary fuel filter | |
| HXE11090 | Engine primary air filter | |
| HXE11091 | Engine secondary air filter | |
| RE284091 | Cab fresh air filter | |
| L214634 | Cab recirculation air filter | |
| DZ100174 | Diesel particulate filter (DPF, S760/S770) | |
| AT129775 | Hydraulic return filter (S760, S770) | |
| CE19990 | Main engine gearcase filter |
Swipe to see full descriptions and actions.
Service intervals
Filter service intervals as published by John Deere for this model, by part number.
- RE509672
- Minimum hours before first engine oil change is 100 Hours. Extended engine oil change every 500 hours or annually, whichever come first. The extended 500 hour interval is only allowed if using Plus-50 II oil with a John Deere filter and diesel fuel with sulfur content less than 15mg/kg (15ppm). If all conditions are not met, change oil and filter at 250 hours of operation.
- RE539465
- Replace every 400 hours and when performance decline is noticed or Diagnostic Trouble Code (DTC) is generated., FT4/Stage IV
- RE533910
- Replace every 400 hours and when performance decline is noticed or Diagnostic Trouble Code (DTC) is generated., FT4/Stage IV
- HXE11090
- Check every 400 hours. Service Primary Air Filter when engine air filter restricted indicator is shown on display. Check safety filter for plugging.
- HXE11091
- Check every 400 hours. Service Primary Air Filter when engine air filter restricted indicator is shown on display. Check safety filter for plugging.
- RE284091
- Clean or replace every 50 hours and as required.
- L214634
- Clean or replace every 200 hours and as required.
- DZ100174
- See your John Deere dealer or qualified service provider.
- AT129775
- Replace every 400 hours.
- CE19990
- Replace within first 100 hours and every 400 hours.
Source: Filter Overview with Service Intervals and Capacities — S700 Series Combines S760, S770, S780, S790, John Deere, release date Apr 2021. Read 2026-09-03.
John Deere S780
John Deere QRG group: S780, S790
Fluid capacities
- Fuel tank
- 1,250 L (330 gal)
- Cooling system with heater (Cool-Gard II)
- 61.2 L (16.3 gal), Tier 2/Stage II85 L (22.5 gal), Tier 3/Stage IIIA and FT4/Stage IV
- Engine crankcase with filter (Plus-50 II)
- 39 L (10.3 gal), Tier 2/Stage II and Tier 3/Stage IIIA43 L (11.4 gal), FT4/Stage IV
- Hydraulic / hydrostatic reservoir (Hy-Gard)
- 47 L (12.4 gal)
Source: Filter Overview with Service Intervals and Capacities — S700 Series Combines S760, S770, S780, S790, John Deere, release date Apr 2021. Read 2026-09-03.
Filter part numbers
The curated filter set for this model, each linked to its own part page for pricing and a quote.
| PN | Description | Action |
|---|---|---|
| RE572785 | Engine oil filter (S680, S690) | |
| RE539465 | Primary fuel filter | |
| RE533910 | Secondary fuel filter | |
| HXE11090 | Engine primary air filter | |
| HXE11091 | Engine secondary air filter | |
| RE284091 | Cab fresh air filter | |
| L214634 | Cab recirculation air filter | |
| DZ100175 | Diesel particulate filter (DPF, S780/S790) | |
| AXE12964 | Hydraulic reservoir filter (closed center) | |
| AN207368 | Hydrostatic charge filter (open center w/ProDrive) |
Swipe to see full descriptions and actions.
Service intervals
Filter service intervals as published by John Deere for this model, by part number.
- RE572785
- Minimum hours before first engine oil change is 100 Hours. Extended engine oil change every 500 hours or annually, whichever come first. The extended 500 hour interval is only allowed if using Plus-50 II oil with a John Deere filter and diesel fuel with sulfur content less than 15mg/kg (15ppm). If all conditions are not met, change oil and filter at 250 hours of operation.
- RE539465
- Replace every 400 hours and when performance decline is noticed or Diagnostic Trouble Code (DTC) is generated., FT4/Stage IV
- RE533910
- Replace every 400 hours and when performance decline is noticed or Diagnostic Trouble Code (DTC) is generated., FT4/Stage IV
- HXE11090
- Check every 400 hours. Service Primary Air Filter when engine air filter restricted indicator is shown on display. Check safety filter for plugging.
- HXE11091
- Check every 400 hours. Service Primary Air Filter when engine air filter restricted indicator is shown on display. Check safety filter for plugging.
- RE284091
- Clean or replace every 50 hours and as required.
- L214634
- Clean or replace every 200 hours and as required.
- DZ100175
- See your John Deere dealer or qualified service provider.
- AXE12964
- Replace every 1000 hours.
- AN207368
- Replace every 400 hours.
Source: Filter Overview with Service Intervals and Capacities — S700 Series Combines S760, S770, S780, S790, John Deere, release date Apr 2021. Read 2026-09-03.
Ordering for pre-season maintenance?
Send us your full parts list and we'll quote every line, genuine and aftermarket side by side.
Frequently asked
- What is the oil capacity of a John Deere S670 combine?
- The John Deere S670 engine crankcase with filter holds 27.5 L (7.3 gal) of Plus-50 II oil, per John Deere's S-Series Quick Reference Guide (S660, S670 group). Confirm against your machine's operator's manual and serial-number break.
- What is the oil capacity of a John Deere S680 combine?
- The John Deere S680 engine crankcase with filter holds 43 L (11.4 gal) of Plus-50 II oil on IT4 engines, or 39 L (10.30 gal) on Tier 2 engines, per John Deere's S-Series Quick Reference Guide (S680, S690 group). Confirm your engine tier against your machine's operator's manual and serial-number break.
- What is the oil capacity of a John Deere S690 combine?
- The John Deere S690 engine crankcase with filter holds 43 L (11.4 gal) of Plus-50 II oil on IT4 engines, or 39 L (10.30 gal) on Tier 2 engines, per John Deere's S-Series Quick Reference Guide (S680, S690 group). Confirm your engine tier against your machine's operator's manual and serial-number break.
- What is the oil capacity of a John Deere S770 combine?
- The John Deere S770 engine crankcase with filter holds 27.5 L (7.3 gal) of Plus-50 II oil on Tier 2/Stage II and FT4/Stage IV engines, or 29 L (7.7 gal) on Tier 3/Stage IIIA engines, per John Deere's S700-Series Quick Reference Guide (S760, S770 group). Confirm your engine tier against your machine's operator's manual and serial-number break.
- What is the oil capacity of a John Deere S780 combine?
- The John Deere S780 engine crankcase with filter holds 39 L (10.3 gal) of Plus-50 II oil on Tier 2/Stage II and Tier 3/Stage IIIA engines, or 43 L (11.4 gal) on FT4/Stage IV engines, per John Deere's S700-Series Quick Reference Guide (S780, S790 group). Confirm your engine tier against your machine's operator's manual and serial-number break.